Phaetus currently offers three hotends compatible with the A1, namely the Standard Version, M4 Version, and Plus Version. The nozzle disassembly/assembly methods and materials of these three hotends vary, so you can select the one that best suits your actual usage requirements.
First, power off the machine. Thanks to the A1's quick-release structure, you can directly remove the original hotend from the machine without complicated operations. Then, transfer the fan from the removed hotend to the new Phaetus Conch Hotend.
If you are using the Standard or Plus Conch Hotend (Phaetus-compatible with the A1), you only need to align the hotend with the A1's quick-release interface and install it in place according to the prompt.
If you have purchased the M4 Version of the A1 Hotend, follow these installation steps:
Align the M4 hotend with the A1's quick-release structure and firmly install it on the machine .
It should be noted that although the M4 hotend has different internal components from the other two integrated hotend models, the installation on the A1 can be completed through the same quick-release structure. And then just screw the nozzle.
