• 0.2 mm hotend with nozzle compatible with H2 series / P2S / X2D on a white background
  • Compatible Bambu hotend with nozzle for H2 series / P2S / X2D
  • Bambu Nozzle diameter comparison: Benchy print detail differences across 0.2 mm, 0.4 mm, 0.6 mm, and 0.8 mm nozzles
  • Bambu Nozzle 0.2 mm text print sample with crisp, clearly readable lettering
  • Bambu Nozzle 0.4 mm text print sample showing partial letter detail loss compared with 0.2 mm
  • Bambu P2S hotend removal with safety gloves (quick-swap latch opened)
  • 0.4 mm hotend with nozzle compatible with H2 series / P2S / X2D on a white background
  • 0.4 mm hotend with nozzle compatible with H2 series / P2S / X2D on a white background
  • 0.6 mm hotend with nozzle compatible with H2 series / P2S / X2D on a white background
  • 0.8 mm hotend with nozzle compatible with H2 series / P2S / X2D on a white background
  • 0.4 High volume hotend with nozzle compatible with H2 series / P2S / X2D on a white background
  • 0.6 High volume hotend with nozzle compatible with H2 series / P2S / X2D on a white background
1 12
Bambu Lab

Bambu P2S Nozzle (Hotend with Nozzle)

Bambu P2S Nozzle (Hotend with Nozzle)

$20.99
$20.99
Shipping calculated at checkout.

1 in stock

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds
Place your order today
17 Jul | Estimated Delivery
  • 90-Day Warranty
  • 30-Day Return
  • 7-Day Delivery
🚚 More information regarding shipping & delivery

Bambu P2S Nozzle

Product Description

This OEM P2S nozzle (a complete P2S hotend with nozzle) is designed for Bambu Lab P2S. Choose 0.2/0.4/0.6/0.8 mm nozzle diameters to match detail vs. throughput, with Standard Flow (everyday printing) and High Flow (high-speed printing) options depending on the variant—larger sizes can support faster printing when your filament and settings allow (results vary). Max printing temperature is 350°C (662°F). Swap only after the hotend fully cools down, and avoid touching the heat block. Results vary by filament, slicer settings, firmware, and installation.

Easier fitment, fewer variables

This OEM P2S hotend-with-nozzle assembly lets you pick 0.2/0.4/0.6/0.8 mm to match your print goals—fine detail (0.2 mm), balanced daily printing (0.4 mm), or higher flow for faster output (0.6/0.8 mm, scenario-dependent). Keeping a spare assembly can reduce downtime when a nozzle clogs or wears out.

Features & Requirements

  • Helps restore reliable printing when a nozzle is worn/clogged by swapping the full hotend assembly (results vary)
  • Helps tune detail vs. speed by choosing nozzle diameter (results vary)
  • For Bambu Lab P2S
  • Quick-swap latch design for easier hotend removal/installation (swap only after cooling down)
  • Max printing temperature: 350°C (662°F)

Product Specification

  • Max printing temperature: 350°C (662°F)
  • Standard-flow hotend (typical 0.4 mm) recommended volumetric flow: 24–40 mm³/s
    PLA / PETG HF: ~24 mm³/s recommended starting point
  • High-flow hotend recommended volumetric flow: 40–65 mm³/s
    PLA: 40–48 mm³/s
    PETG HF: 32 mm³/s
  • Length: 49.2 mm (1.94 in)
  • Packaging size: 60 × 60 × 30 mm (2.36 × 2.36 × 1.18 in)
  • Packaging weight: 0.026 kg (0.057 lb)

Better Than: unknown-fit alternatives

Some users prefer OEM hotends over off-brand alternatives because fit, heating behavior, and day-to-day consistency can be more predictable—especially for High Flow configurations where small mechanical or nozzle-geometry differences can affect calibration and clogging behavior. Performance still varies by filament, print settings, firmware, and installation.

Package Includes

- Hotend with Nozzle × 1

Installation Guide

Please learn about the installation for P2S on Bambu Lab Wiki.

Get the Latest Bambu Gear from Call3D

Get the Latest Bambu Gear from Call3D

Get the Latest Bambu Gear from Call3D

Get the Latest Bambu Gear from Call3D

FAQs about Bambu P2S Nozzle (Hotend with Nozzle)

Do I need to remove leftover filament from a removed nozzle/hotend?

If you’ll keep printing the same material, you usually don’t need to—your next print will typically purge the small остатки/leftover filament. If you’re switching to a different material, you can remove the leftover filament first (for example, use pliers to pull it out once it’s safe to handle).

I opened both latches, but the hotend won’t come out—what should I do?

Gently grip the lower-left area of the heatsink (the section with the white printed text) with pliers and pull upward to lift the hotend out. Avoid squeezing the heater block, and only do this after the hotend has fully cooled down.

What if the tool I purchased doesn’t meet my expectations?

If you’re not satisfied with your purchase, we offer a hassle-free return policy. Just contact our customer support team within 30 days, and we'll help you with the return or exchange process.

How can I track my order?

You will receive a YunExpress order number immediately after your order ships.Use this number to track the package from our warehouse to your destination country.
For the following countries, you will also receive a corresponding local tracking number.Please use the official website of the local carrier for real-time delivery updates:

  • United States: USPS
  • Germany & Netherlands: DHL
  • United Kingdom: Evri
  • Spain: CTT
  • France: Colis Privé

For all other regions: Only a YunExpress tracking number will be provided (no local carrier tracking available).

How can I ensure that I'm purchasing the correct product?

You can check the compatibility information in our product filters or in the Features section of each item. If you’re still unsure which part is right for your printer model, feel free to contact our support team for confirmation.

Customer reviews

  • Found this shop on Reddit, chatted with a real person about the P2S filter I needed. Asked if they could ship to SG, they checked and made it happen! Super happy because this filter is basically impossible to find locally and always out of stock everywhere else. Fast, friendly, and solved my problem perfectly. Will buy again!
    testimonial author avatar
    Ok_Government_1125
    Hobbyist in Singapore
  • Placed my order on February 3rd and received it on February 12th —only 7 business days! Shopping was easy, communication was great, and delivery times were really decent. Very happy with my purchase!
    testimonial author avatar
    Brad Brockway
    Engineering leader
  • Bought a ventilation system but changed my mind last minute. I thought returns would be a huge hassle, but they told me there’s a return warehouse in Houston only about a 10-minute drive from where I live in Missouri City. Drove over and returned it super easily. Super convenient return process, great experience overall!
    testimonial author avatar
    RayRobert
    Project manager
0.2 mm hotend with nozzle compatible with H2 series / P2S / X2D on a white background

Bambu P2S Nozzle (Hotend with Nozzle)

$20.99
$20.99