• Bambu Lab Rotary Attachment front view on white background for H2D/H2S laser engraving — Bambu Rotary Attachment (H2D rotary attachment)
  • Rotary attachment uses LiDAR for automatic measurement, calibration, and preview alignment on a cylindrical workpiece.
  • Cylinder mode result engraved on a tumbler using Bambu Rotary Attachment — precise rotary engraving on a cylindrical cup with H2D rotary attachment
  • Revolve Shape mode result engraved on a tapered cup using Bambu Lab Rotary Attachment — curved surface rotary engraving with Bambu Rotary Attachment for H2D/H2S
  • Top-down camera preview showing the design layout positioned on the unfolded surface before engraving.
  • Bambu Lab Rotary Attachment package contents: rotary attachment, support module, claws, tape measure, spirit level, and 4‑pin Bambu Bus cable — Bambu Rotary Attachment for H2D/H2S
1 6
Bambu Lab

Bambu Lab Rotary Attachment for H2 Series Laser Engraving

Bambu Lab Rotary Attachment for H2 Series Laser Engraving

$299.00
$299.00
Shipping calculated at checkout.

1 in stock

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds
Place your order today
17 Jul | Estimated Delivery
  • 90-Day Warranty
  • 30-Day Return
  • 7-Day Delivery
🚚 More information regarding shipping & delivery

Bambu Lab Rotary Attachment

Airplane shipping graphic with Bambu Rotary Attachment for H2D/H2S laser engraving — first to have it, early-access delivery

Product Description

The Bambu Lab Rotary Attachment is a rotary engraving add-on for compatible H2 Series laser workflows. It helps engrave tumblers, mugs, bottles, tools, and other curved or cylindrical objects by holding and rotating the workpiece during laser engraving. With the right setup, it supports more repeatable placement, focus alignment, and wrap-around engraving than freehand positioning. Compatibility, engraving quality, and alignment depend on the machine version, firmware, object geometry, surface finish, leveling, and calibration.

How the Bambu Lab Rotary Attachment Works?

  • A rotary attachment expands a laser workflow beyond flat materials by rotating cups, tumblers, bottles, and other curved objects during engraving.
  • Supported Bambu laser workflows can use software preview/alignment tools to help position artwork more repeatably, while the clamp/support setup keeps the workpiece steadier than manual roll-and-engrave attempts.
  • Results depend on object shape, surface finish, leveling, calibration, and the machine/firmware configuration.

Features & Requirements

  • Bambu Lab Rotary Attachment for compatible H2 Series laser engraving workflows
  • Enables rotary engraving on tumblers, mugs, bottles, tools, and curved objects
  • Supports controlled rotation + clamping for more repeatable placement and focus alignment (results vary)
  • Works with Bambu laser workflow features such as object preview/alignment where supported
  • Before buying: verify H2D / H2S / H2C laser compatibility and firmware requirements
  • Not recommended for transparent, mirror-finish, very small, or unstable objects unless officially supported
  • Supported diameter range: 57–105 mm (2.24–4.13 in)
  • Related review: read the H2 Series Rotary Attachment review before buying

Product Specification

  • Product type: rotary engraving attachment
  • Compatibility: compatible Bambu Lab H2 Series laser workflows (confirm your exact model/version)
  • Supported workpiece diameter range: 57–105 mm (2.24–4.13 in)
  • Maximum processing length: up to 220 mm (8.66 in) (H2D reference)
  • Packaging size: 355 × 182 × 102 mm (13.98 × 7.17 × 4.02 in)
  • Packaging weight: 1.45 kg (3.20 lb)
  • Materials: plastic, metal
  • Color: black

Why a Rotary Attachment Beats Manual “Roll-and-Engrave” Attempts

Controlled rotation and clamping vs. hand-rotating objects (more repeatable results)
Better alignment and focus consistency for cylindrical surfaces (setup-dependent)
Less trial-and-error for batch personalization (results vary)

Package Includes

• Rotary Attachment × 1
• Support Module × 1
• Claw × 1 set
• Tape Measure × 1
• Spirit Level × 1
• Bambu Bus Cable 4-pin × 1

Installation Guide

Please refer to the installation guide for the Rotary Attachment available on Bambu Lab Wiki.

Get the Latest Bambu Gear from Call3D

Get the Latest Bambu Gear from Call3D

Get the Latest Bambu Gear from Call3D

Get the Latest Bambu Gear from Call3D

FAQs about Bambu Lab Rotary Attachment for H2 Series Laser Engraving

What can I engrave with the Bambu Lab Rotary Attachment?

It is mainly intended for compatible cylindrical or curved objects such as tumblers, mugs, bottles, flasks, tools, and small personalization items within the supported size range. Smooth, stable cylinders are usually easier to align than irregular or very small objects.

Can I use this on a non-laser H2D?

Do not assume non-laser H2D compatibility. The rotary attachment is intended for compatible H2 Series laser workflows, which may require specific laser hardware, airflow/exhaust components, firmware, and official support. Verify your exact machine version before ordering.

What if the tool I purchased doesn’t meet my expectations?

If you’re not satisfied with your purchase, we offer a hassle-free return policy. Just contact our customer support team within 30 days, and we'll help you with the return or exchange process.

How can I track my order?

You will receive a YunExpress order number immediately after your order ships.Use this number to track the package from our warehouse to your destination country.
For the following countries, you will also receive a corresponding local tracking number.Please use the official website of the local carrier for real-time delivery updates:

  • United States: USPS
  • Germany & Netherlands: DHL
  • United Kingdom: Evri
  • Spain: CTT
  • France: Colis Privé

For all other regions: Only a YunExpress tracking number will be provided (no local carrier tracking available).

How can I ensure that I'm purchasing the correct product?

You can check the compatibility information in our product filters or in the Features section of each item. If you’re still unsure which part is right for your printer model, feel free to contact our support team for confirmation.

Customer reviews

  • Found this shop on Reddit, chatted with a real person about the P2S filter I needed. Asked if they could ship to SG, they checked and made it happen! Super happy because this filter is basically impossible to find locally and always out of stock everywhere else. Fast, friendly, and solved my problem perfectly. Will buy again!
    testimonial author avatar
    Ok_Government_1125
    Hobbyist in Singapore
  • Placed my order on February 3rd and received it on February 12th —only 7 business days! Shopping was easy, communication was great, and delivery times were really decent. Very happy with my purchase!
    testimonial author avatar
    Brad Brockway
    Engineering leader
  • Bought a ventilation system but changed my mind last minute. I thought returns would be a huge hassle, but they told me there’s a return warehouse in Houston only about a 10-minute drive from where I live in Missouri City. Drove over and returned it super easily. Super convenient return process, great experience overall!
    testimonial author avatar
    RayRobert
    Project manager
Bambu Lab Rotary Attachment front view on white background for H2D/H2S laser engraving — Bambu Rotary Attachment (H2D rotary attachment)

Bambu Lab Rotary Attachment for H2 Series Laser Engraving

$299.00
$299.00