• P2S Nozzle Brush drop-in replacement silicone wiper for Bambu Lab P2S.
  • P2S Nozzle Brush drop-in replacement silicone wiper for Bambu Lab P2S.
  • P2S Nozzle Brush drop-in replacement silicone wiper for Bambu Lab P2S.
1 3
Call3D

Upgraded Nozzle Brush for Bambu Lab P2S

Upgraded Nozzle Brush for Bambu Lab P2S

$5.99
$5.99
Shipping calculated at checkout.

In stock

Hurry up! Offer ends in
00 Days
00 Hours
00 Minutes
00 Seconds
Place your order today
04 Jul | Estimated Delivery
🚚 More information regarding shipping & delivery

P2S Nozzle Brush Overview

A hotend nozzle wrapped in messy PTFE tape, a tedious alternative to using a dedicated P2S Nozzle Brush.

Product Description

Tired of stray filament blobs ruining your top layers? This P2S Nozzle Brush is a drop-in upgrade that replaces the stock silicone wiper for Bambu Lab P2S. It features a light silicone oil mist, so as the nozzle passes over it during the standard wipe routine, sticky buildup (like PETG) slides right off. By keeping the nozzle clean, it helps prevent those dreaded "nozzle boogers" from dragging onto your print and causing ugly surface bumps or partial clogs. 

Stop Nozzle Boogers from Ruining Your Prints

If you print with sticky materials like PETG, you know the struggle: filament builds up on the nozzle, and the stock wiper often fails to clean it completely during the standard wipe routine. Those leftover "nozzle boogers" eventually drop onto your model, leaving ugly surface bumps or ruining your top layers. By upgrading to this replacement silicone brush—pre-treated with a light mist of silicone oil—filament releases much easier. It helps ensure your nozzle actually gets wiped clean during the routine, keeping your prints free of stray blobs

Key Features & Requirements

  • Helps keep your prints free of surface bumps by sweeping away sticky nozzle buildup
  • Drops right in to replace the stock Bambu wiper for more consistent, hands-free cleaning
  • Great for gooey materials like PETG that love to cling to the hotend
  • Pre-treated with a mist of silicone oil so filament releases easier during the standard wipe routine

Product Specification

- Material: Silicone
- Compatibility: For Bambu Lab P2S
- Intended use: Nozzle exterior wiping/cleaning

Ditch the PTFE Tape and Finicky Add-ons

- Add-on third‑party brush: wiping effect can be inconsistent depending on alignment/height; a replacement wiper maintains consistent in-routine contact
- PTFE tape wrapped on the nozzle: more tedious to apply and maintain; this brush is a drop-in wiper upgrade
- No upgrade: sticky blobs (often worse with PETG) can get dragged onto the model and leave surface bumps

Package Includes

P2S Nozzle Brush × 1

Installation Guide

Read the wiki
Nozzle Wiping Pad Replacement Guide for the P2S | Bambu Lab Wiki

Explore Precision Upgrades for Your Bambu Lab

Explore Precision Upgrades for Your Bambu Lab

Explore Precision Upgrades for Your Bambu Lab

Explore Precision Upgrades for Your Bambu Lab

FAQs about Upgraded Nozzle Brush for Bambu Lab P2S

Can a PTFE-coated nozzle solve this instead?

A PTFE-coated nozzle is better at repelling sticky filament, but the non-stick coating gradually wears off during printing. It typically lasts around 500–1000 hours. Once the coating degrades, you will start facing the same filament buildup issues again, making this brush a necessary long-term companion.

What if the silicone oil wears off or evaporates?

If the wiping performance drops over time, you can easily maintain it by buying a standard silicone oil spray (mold release agent) and reapplying a light mist yourself. Do not use WD-40, as it will cause carbon buildup on the hot nozzle.

How can I make sure this product fits my printer?

A: You can check the compatibility information in our product filters or in the Features section of each item. If you’re still unsure which part is right for your printer model, feel free to contact our support team for confirmation.

How can I track my order?

You will receive a YunExpress order number immediately after your order ships.Use this number to track the package from our warehouse to your destination country.
For the following countries, you will also receive a corresponding local tracking number.Please use the official website of the local carrier for real-time delivery updates:

  • United States: USPS
  • Germany & Netherlands: DHL
  • United Kingdom: Evri
  • Spain: CTT
  • France: Colis Privé

For all other regions: Only a YunExpress tracking number will be provided (no local carrier tracking available).

What if the tool I purchased doesn’t meet my expectations?

If you’re not satisfied with your purchase, we offer a hassle-free return policy. Just contact our customer support team within 30 days, and we'll help you with the return or exchange process.

Customer reviews

  • Placed my order on February 3rd and received it on February 12th —only 7 business days! Shopping was easy, communication was great, and delivery times were really decent. Very happy with my purchase!
    testimonial author avatar
    Brad Brockway
    Engineering
  • Found this shop on Reddit, chatted with a real person about the P2S filter I needed. Asked if they could ship to SG, they checked and made it happen! Super happy because this filter is basically impossible to find locally and always out of stock everywhere else. Fast, friendly, and solved my problem perfectly. Will buy again!
    testimonial author avatar
    Ok_Government_1125
    Hobbyist in Singapore
  • Bought a ventilation system but changed my mind last minute. I thought returns would be a huge hassle, but they told me there’s a return warehouse in Houston only about a 10-minute drive from where I live in Missouri City. Drove over and returned it super easily. Super convenient return process, great experience overall!
    testimonial author avatar
    RayRobert
    Project manager
P2S Nozzle Brush drop-in replacement silicone wiper for Bambu Lab P2S.

Upgraded Nozzle Brush for Bambu Lab P2S

$5.99
$5.99