X1C chamber heater – M2 Lite for Bambu Lab X1C
X1C chamber heater – M2 Lite for Bambu Lab X1C
Adjustable Chamber Heating
Adjust the set point from 40°C to 60°C (104°F to 140°F) to support a steadier chamber environment for temperature-sensitive materials such as ABS and ASA.
Automatic Control and Filament Drying
An infrared sensor starts and stops heating around the print without Wi-Fi or an app. Manual mode can also be used to dry filament at 60°C (140°F).
In stock
The X1C chamber heater from MartilloTech is the M2 Lite, a third-party active chamber heater for Bambu Lab X1C printers. It is also compatible with X1, P1S and P2S printers. By adding controlled heat to the enclosure, it helps reduce uneven cooling and corner lift when printing temperature-sensitive materials such as ABS and ASA.
The heater has an adjustable set point of 40–60°C (104–140°F) and circulates air inside the chamber. An infrared sensor detects toolhead movement in automatic mode, starting the heater with a print and stopping heating approximately 180 seconds after movement ends. An A/M switch also allows manual operation. Cold-air mode circulates chamber air without heating; in manual mode, the unit can also be used to dry filament at 60°C (140°F), following the manufacturer’s instructions.
The M2 Lite does not include HEPA or activated carbon filtration. Choose the 110 V or 220 V version to match the local supply. Installation connects to the printer’s internal AC wiring rather than a wall outlet, so disconnect the printer before installation and seek qualified help if unsure about mains wiring. This accessory is made by MartilloTech, not Bambu Lab.
ETA:
- 90-Day Warranty
- 30-Day Return
- 7-Day Delivery

X1C Chamber Heater Overview
Infrared Motion Sensing for Printhead-Centric Automation
The MartilloTECH Heater use infrared (IR) detection to monitor the Bambu Lab printer’s printhead movement—an approach that directly addresses the others temperature-threshold limitations. The heater activates instantly when the printhead begins moving (regardless of heat bed temperature) and shuts off the moment the printhead stops, whether the print is complete, paused for a filament change, or halted due to spaghetti detection or another failure.
Product Specification
- Compatible Printers: Bambu Lab P2S / P1S / X1 / X1C
- Product Type: Active chamber heater; no air filtration
- Temperature Set Range: 40–60°C (104–140°F)
- Rated Power: 300 W
- Voltage Options: AC 110 V or AC 220 V
- Dimensions: 89 × 274 × 49 mm (3.50 × 10.79 × 1.93 in)
- Control: Infrared automatic mode and A/M manual switch
- Air Modes: Hot air or unheated air circulation
Package Includes
1 × Chamber Heater M2 Lite
2 × Anti-vibration Silicone Gaskets
Gasket Fastening Screws
Heater Fastening Screws
Longer Side-Rail Screws for P1S and older X1 / X1C
Not Included: HEPA and activated carbon filtration module
Requirements & Installation Notes
- Voltage: Select the 110 V or 220 V version that matches your local supply.
- Power: Connects to internal AC terminals; it is not a wall-plug accessory.
- Mounting: P1S and older X1 / X1C use supplied longer side-rail screws. Newer X1 / X1C require right-side panel removal and a nut and screw.
- Safety: Disconnect printer power before installation. If unsure about mains wiring, use a qualified technician. Modifications may affect warranty; check applicable terms.
- Download the User Manual
Explore Precision Upgrades for Your Bambu Lab
Explore Precision Upgrades for Your Bambu Lab
Explore Precision Upgrades for Your Bambu Lab
Explore Precision Upgrades for Your Bambu Lab
Frequently Asked Questions About X1C Chamber Heater
Does the chamber heater plug into the printers power supply or an external plug?
The chamber heater is currently powered by the printer's power supply.
Does this heater work automatically, or do I control it manually?
It uses IR printhead detection — fully automatic. It turns on when printing starts and off when finished, no app, Wi-Fi, or manual control needed.
Does the M2 Lite include an air purifier?
No. The M2 Lite heats and circulates chamber air but does not include HEPA or activated carbon filtration. The M2 with Purifier is a separate configuration.
Can the M2 Lite dry filament?
The manufacturer describes drying up to six spools in manual mode at 60°C (140°F) for eight hours or more. Do not direct the hot-air outlet at the spools, and allow filament to cool before sealing it.
Why Shop with Call3D ?
Buy with confidence from an experienced 3D printing team offering carefully selected products, clear compatibility guidance, responsive support, and transparent order fulfillment.
Support FAQ
What Should I Buy from Call3D?
Call3D is particularly valuable when you are looking for:
- Carefully selected third-party accessories, mods, and upgrades for Bambu Lab printers;
- Compatibility-sensitive parts that require clearer model, version, or installation guidance;
- Specialized solutions that may be difficult to identify on general marketplaces;
- Newly released or locally unavailable Bambu Lab products;
- Multiple accessories that can be combined into one order.
Every product we list is selected for a clear functional purpose, with compatibility, installation requirements, and known limitations reviewed before publication. Our goal is to help customers choose the right solution—not simply offer the largest possible catalog.
Why Call3D over a Marketplace?
General marketplaces may offer a large number of similar-looking products from different sellers, making it difficult to evaluate compatibility, product quality, and after-sales responsibility.
Call3D operates as a specialist curated store. We review a product’s purpose, compatibility, installation requirements, and available technical information before listing it. If customers need help before ordering or encounter a problem afterward, they can contact the same team that selected and documented the product.
We focus on long-term customer relationships, clear communication, and responsible after-sales support rather than a one-time transaction.
How can I track my order?
You will receive a YunExpress order number immediately after your order ships.Use this number to track the package from our warehouse to your destination country.
For the following countries, you will also receive a corresponding local tracking number.Please use the official website of the local carrier for real-time delivery updates:
- United States: USPS
- Germany & Netherlands: DHL
- United Kingdom: Evri
- Spain: CTT
- France: Colis Privé
For all other regions: Only a YunExpress tracking number will be provided (no local carrier tracking available).
How long will my order take to arrive?
Call3D normally prepares and hands over orders to the carrier within 48 hours. In September 2026, 51 completed deliveries averaged 4.0 business days in transit from carrier acceptance to delivery.
Recent US deliveries averaged 4.1 business days in transit, while completed deliveries across eight observed EU destinations averaged 4.3 business days. These figures do not include Call3D’s order-preparation time.
These are recent observed averages rather than guaranteed delivery dates. Actual timing may vary depending on the destination, customs processing, holidays, and local carrier operations.
Do you ship to my country?
Call3D currently serves customers in 36 countries and regions:
European Union: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, and Sweden.
Other destinations: Australia, Canada, Israel, New Zealand, Norway, Singapore, Switzerland, the United Kingdom, and the United States.
If your destination is not listed, please contact Call3D before placing an order. We will assess shipping availability, customs requirements, taxes, and applicable local regulations, then confirm whether we can serve your location. Delivery to an unlisted destination is not guaranteed until confirmed by our team.
What is your return policy?
Eligible unused items in their original condition and packaging may be returned within 30 days of delivery. Please contact Call3D for approval before returning an item. Refunds are issued to the original payment method after inspection; return shipping costs apply.
Duties, VAT & Sales Tax
Call3D product prices include applicable import duties. For orders delivered to the European Union, applicable VAT is also included in the displayed price. Customers should not normally be required to pay additional import duties or VAT upon delivery.
For orders delivered within the United States, applicable state and local sales tax is calculated based on the shipping address and displayed at checkout before payment. Call3D collects sales tax only in jurisdictions where it is required to do so under applicable tax rules. If no sales tax is shown at checkout, Call3D is not collecting sales tax for that order.
If you receive an unexpected request for import duties or VAT, please contact Call3D Support before making an additional payment.
Call3D Store & Service Reviews
-
Found this shop on Reddit, chatted with a real person about the P2S filter I needed. Asked if they could ship to SG, they checked and made it happen! Super happy because this filter is basically impossible to find locally and always out of stock everywhere else. Fast, friendly, and solved my problem perfectly. Will buy again!
Ok_Government_1125Hobbyist in Singapore -
I’ve known Enderwick since 2014 and worked alongside him for many years. With over a decade in the industry, he and his team bring an extremely high level of expertise.He has built an enormous 3D printing community here in China and is always coming out with new solutions—each one never fails to impress me.
Daniel O'ConnorDeputy Vice President of TCT Magazine -
The support offered after i wrote about a defective product was nothing short of exemplary, i applaud Call3D and its support team who fixed my problem swiftly, and made sure to take notice!
Tommaso PasqualiOperational Quality Sterile Lead -
When EP invited me to Shenzhen back in 2019, I was absolutely blown away by the hardware innovation coming out of China. Just one year later, Bambu Lab burst onto the scene—and their solutions have grown right alongside Bambu, evolving from the very beginning to where they are today.
Chris ConneryVP for Global Analysis at CONTEXT -
Decent and helpful staff - customer service is outstanding. Secure payment and fast shipping. The items are of great quality. Highly recommended!
Oliver FodorTechnical Manager -
Bought a ventilation system but changed my mind last minute. I thought returns would be a huge hassle, but they told me there’s a return warehouse in Houston only about a 10-minute drive from where I live in Missouri City. Drove over and returned it super easily. Super convenient return process, great experience overall!
RayRobertProject manager
- 5 stars: 3 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
This thing is unbelievably useful—I honestly wish I’d bought it sooner. My prints have been warping far less, and it feels completely worth the price. The unit is also made really nicely and looks well finished.
Super impressed—I ended up buying two more units. It feels like real MartilloTech “big brand” quality. If you want a reliable chamber heater, this one has been the most worry-free option for me, with stable performance and less wasted filament from failed ABS prints.
This chamber heater is excellent. It holds chamber temperature very steadily, and the build quality is impressive. I installed it by following the tutorial step by step—it's not hard, but you do need to be careful and take your time. In daily use it’s very convenient, and I like that it can sense and start/stop automatically. Parts that used to warp badly are coming out much better after installing it.
X1C chamber heater – M2 Lite for Bambu Lab X1C