Bambu Lab Accessory Reviews – Tested Best Picks

Our Bambu Lab accessory reviews test and rate the best nozzles, build plates, mods, and upgrades for A1/A1 Mini/P1. All results data-driven, community-vetted, and reviewed by top Bambu experts.

banner image
Bambu Lab P1S heated chamber upgrade
11 April, 2026

P1S Chamber Heater Review: Is a Heated Chamber ...

If you print ABS/ASA or Nylon and keep fighting warping (curling/lifting), this review breaks down whether an active chamber-heater kit is worth it. It focuses on install effort, safety notes,...

Warping (Curling / Lifting)
11 April, 2026

P1S Chamber Heater Review: Is a Heated Chamber Upgrade Worth It for...

If you print ABS/ASA or Nylon and keep fighting warping (curling/lifting), this review breaks down whether an active chamber-heater kit is worth it. It focuses on install effort, safety notes, and the practical verdict: who benefits from stable chamber temps...

Read More
P1S chamber heater together with the AMS
21 February, 2026

MartilloTech P1S Chamber Heater Installation & ...

If you print ABS/ASA or Nylon and keep fighting warping (curling/lifting), this review breaks down whether an active chamber-heater kit is worth it. It focuses on install effort, safety notes,...

Warping (Curling / Lifting)
21 February, 2026

MartilloTech P1S Chamber Heater Installation & Revi...

If you print ABS/ASA or Nylon and keep fighting warping (curling/lifting), this review breaks down whether an active chamber-heater kit is worth it. It focuses on install effort, safety notes,...

Read More
Unbox the X1C Chamber Heater
18 February, 2026

X1C Chamber Heater Unbox & Install: MartilloTec...

Warping (curling/lifting) on ABS/ASA is often driven by chamber temperature and drafts. This review shows what the MartilloTech heater changes in real use, the key install risks (routing and wiring),...

Warping (Curling / Lifting)
18 February, 2026

X1C Chamber Heater Unbox & Install: MartilloTech Act...

Warping (curling/lifting) on ABS/ASA is often driven by chamber temperature and drafts. This review shows what the MartilloTech heater changes in real use, the key install risks (routing and wiring),...

Read More

Skip the scrolling — Choose a tag for fast answers

Skip the scrolling — Choose a tag for fast answers

Skip the scrolling — Choose a tag for fast answers

Skip the scrolling — Choose a tag for fast answers

Best Bambu Lab Accessories - Our Top Tested Picks

Best Bambu Lab accessories from our testing. Editor-approved for performance and reliability. Tap markers to explore.

serveral Bambu 3D printer
x Call3D C-Plate for Bambu Lab A1 MiniCall3D C-Plate for Bambu Lab A1 Mini

Call3D C-Plate for Bambu Lab A1 Mini

x ATP Electronics SDcard 4GBSLC Micro SD card and its features

ATP Brand New Industrial-Grade SD Card 4GB

x Bambu TPU Feed Assist Module installed on rear of Bambu H2D 3D printerBambu TPU Feed Assist Module compatible placement options with AMS HT 3D printing accessory

Bambu TPU Feed Assist Module: Eliminate TPU Printing Hassles

x Call3D 0.4mm Hotend Structure for Bambu Lab X1/P1 | X1 Nozzle & P1S Nozzle CompatibleBambu Lab P1S & X1C Nozzle Upgrade (0.4mm) — Call3D TZ2.0 Detachable Hotend

Bambu Lab P1S & X1C Nozzle Upgrade (0.4mm) — Call3D TZ2.0 Detachable Hotend

x FNATR Ventilation System front view, dedicated air purification for Bambu Lab Fnatr P1S Ventilation System installed with Bambu Lab P1S 3D printer, complete setup

FNATR P1S/X1C Ventilation System (External Vent & 5-Stage Filtration)

x External exhaust fan kit p2s with accessories for Bambu P2S 3D printerP2S Filament Buffer Installation for Bambu Lab P2 3D Printer

External Exhaust Fan Kit for Bambu Lab P2S

FAQs

Is PETG recommended for better support removal?

Yes, using PETG as a support interface with PLA makes supports much easier to remove and improves surface quality.

What printed upgrades are must-haves for the Printer?

Popular prints: purge (poop) bucket, pop deflector, fan cover, and travel handle — all available on MakerWorld.

Do I need a smooth PEI build plate？

Yes, it improves bottom-surface quality and makes parts easier to remove — one of the most popular A1 upgrades.

What accessories do I need for my first Bambu Lab A1?

Essential upgrades include a 0.2mm nozzle for miniatures, hardened 0.4/0.6mm nozzles, a smooth PEI build plate, silicone socks, and a basic maintenance kit.

Is the AMS / AMS Lite worth buying for the Bambu Lab Printer?

Yes, it adds multi-color / multi-material support and automatic filament switching. It’s cheaper in a combo than purchased later.

Featured KOL Contributors

  • testimonial author avatar
    Chengdouzaowu
    Bambu Lab educator | slicing & support optimization specialist
  • Avatar of RC EAST, custom RC builds & 3D printing creator
    RC EAST
    Custom RC builds & 3D printing specialist. Creative mods, pro tips, and urban-inspired maker content.
  • testimonial author avatar
    (SANWEN)SEVEN_ZH
    3D Printing Tech Blogger | Bambu Lab hardware & filament testing
Enderwick, 3D printing industry veteran & Call3D founder, speaking on a panel at TCT Asia 2026

About This Column / Editor Note

Tested, Listed, Trusted.

Enderwick is the founder of Call3D and editor of this column, specializing in Bambu Lab accessories and 3D printing upgrades. With 10+ years in additive manufacturing, he previously led content at TCT Asia MAG and served as Marketing Director at Raise3D, where he published Prototype Magazine. He personally verifies all testing and approves every recommendation to ensure honest, real-world results.

Learn more about Call3D